PROMOUSS: Silicone-free anti-moss agent for use in industry.

PROMOUSS is an anti-moss and de-aerating agent particularly suitable for aqueous environments that contain surfactants, proteins, starch. It prevents mosses, lichens or other parastic plants from forming even in extremely difficult conditions and quickly and effectively destroys any moss already formed. It is a chlorine and solvent free anti-corrosive product.

PROMOUSS is a formulation containing a macromolecular synthetic resin and an alkylene oxide derivative in alcohols and esters, with an emulsifier.

PROMOUSS is a very fluid liquid; emulsifiable in water.

ADVANTAGES

  • Curative product: Destroys moss that has already formed
  • Preventive product: Prevents moss from appearing
  • Broad spectrum of action
  • Long lasting action
  • Double function: Anti-moss and de-aerating agent
  • No impact on treated products since PROMOUSS is chemically inert

CHARACTERISTICS

APPEARANCE Cloudy liquid
CONTENT 100 %
DENSITY AT 20° C 0,87
PH VALUE (AT 100 G/L) 6-7
FLASH POINT 60%
SOLUBILITY IN WATER Emulsionnable jusqu’à 10% d’eau

RECOMMENDATIONS FOR IMPLEMENTATION AND USES

PROMOUSS can be dispensed directly by pump or by a single drop dispenser, but it is also possible to start by emulsifying it (to dilute it). Emulsifying the product makes it easier to apply.

PROMOUSS may be diluted using an in-line mixer. The emulsion obtained must be stirred constantly if it is not immediately used.

If PROMOUSS is dispensed without prior dilution, it must be introduced into a high turbulence location; in an emulsified form, the product can be dispensed in areas where there is less turbulence.

PACKAGING

PROMOUSS is sold in 5 litre, 10 litre and 20 litre containers.

pdf_img_en